<?xml version="1.0" encoding="utf-8"?>
<!-- Created with ExoImplantEditor [Version 6184] -->
<ImplantLibraryEntry xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>Glidewell Camlog Screw-Line (IOST)</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>false</IsWithRotationLock>
  <SupportOrientation>-1</SupportOrientation>
  <Supplier>Glidewell Laboratories</Supplier>
  <SupplierLink>http://www.glidewelldirect.com/</SupplierLink>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.7471275329589844</x>
        <y>0.0021989345550537109</y>
        <z>10.8640718460083</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>CamlogSL_3.3_ScanIOST.STL</MarkerFilename>
      <DisplayInformation>3.3mm</DisplayInformation>
      <Keyword>33mm</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.7473831176757813</x>
            <y>0.021515011787414551</y>
            <z>10.867400169372559</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.3_Base.sdfa</SupportFilename>
          <DisplayInformation>Ti</DisplayInformation>
          <IsWithInterface>false</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>Ti</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.7442512512207031</x>
            <y>-0.11528098583221436</y>
            <z>10.853937149047852</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.3_4.5mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.3_4.5mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>4.5mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>45mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.7457847595214844</x>
            <y>-0.09926915168762207</y>
            <z>10.878485679626465</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.3_6mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.3_6mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>6mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>6mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.7467384338378906</x>
            <y>-0.026892781257629395</y>
            <z>10.92287540435791</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.3_HybridBarBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.3_HybridBarInterface.sdfa</InterfaceFilename>
          <DisplayInformation>Hybrid Bar</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>HybridBar</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.9900970458984375</x>
        <y>-0.078530788421630859</y>
        <z>10.84951114654541</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>CamlogSL_3.8_ScanIOST.STL</MarkerFilename>
      <DisplayInformation>3.8mm</DisplayInformation>
      <Keyword>38mm</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.9886550903320313</x>
            <y>-0.12528061866760254</y>
            <z>10.894314765930176</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.8_Base.sdfa</SupportFilename>
          <DisplayInformation>Ti</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>Ti</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.989959716796875</x>
            <y>-0.10111117362976074</y>
            <z>10.866954803466797</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.8_4.5mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.8_4.5mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>4.5mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>45mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.9897918701171875</x>
            <y>-0.11402773857116699</y>
            <z>10.886002540588379</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.8_6mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.8_6mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>6mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>6mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.9898414611816406</x>
            <y>-0.083411693572998047</y>
            <z>10.880505561828613</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_3.8_HybridBarBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_3.8_HybridBarInterface.sdfa</InterfaceFilename>
          <DisplayInformation>Hybrid Bar</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>HybridBar</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.2741432189941406</x>
        <y>0.011607527732849121</y>
        <z>10.890178680419922</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>CamlogSL_4.3_ScanIOST.STL</MarkerFilename>
      <DisplayInformation>4.3mm</DisplayInformation>
      <Keyword>43mm</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.2728996276855469</x>
            <y>-0.0093041658401489258</y>
            <z>10.896831512451172</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_4.3_Base.sdfa</SupportFilename>
          <DisplayInformation>Ti</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>Ti</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.2638359069824219</x>
            <y>-0.11690676212310791</y>
            <z>10.88593864440918</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_4.3_4.5mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_4.3_4.5mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>4.5mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>45mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.2630691528320312</x>
            <y>-0.13620495796203613</y>
            <z>10.882412910461426</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_4.3_6mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_4.3_6mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>6mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>6mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.2638359069824219</x>
            <y>-0.11690676212310791</y>
            <z>10.88593864440918</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_4.3_HybridBarBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_4.3_HybridBarInterface.sdfa</InterfaceFilename>
          <DisplayInformation>Hybrid Bar</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>HybridBar</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.6246833801269531</x>
        <y>-0.0035904645919799805</y>
        <z>10.917861938476563</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>CamlogSL_5.0_ScanIOST.STL</MarkerFilename>
      <DisplayInformation>5.0mm</DisplayInformation>
      <Keyword>50mm</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.6134452819824219</x>
            <y>-0.13195490837097168</y>
            <z>10.849464416503906</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_5.0_Base.sdfa</SupportFilename>
          <DisplayInformation>Ti</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>Ti</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.6158332824707031</x>
            <y>-0.10468029975891113</y>
            <z>10.865592002868652</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_5.0_4.5mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_5.0_4.5mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>4.5mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>45mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.6116180419921875</x>
            <y>-0.15284645557403565</y>
            <z>10.855894088745117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_5.0_6mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_5.0_6mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>6mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>6mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.6232757568359375</x>
            <y>-0.019606351852416992</y>
            <z>10.893359184265137</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_5.0_HybridBarBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_5.0_HybridBarInterface.sdfa</InterfaceFilename>
          <DisplayInformation>Hybrid Bar</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>HybridBar</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>3.1226425170898438</x>
        <y>-0.026932358741760254</y>
        <z>10.895255088806152</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>CamlogSL_6.0_ScanIOST.STL</MarkerFilename>
      <DisplayInformation>6.0mm</DisplayInformation>
      <Keyword>60mm</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>3.098236083984375</x>
            <y>-0.30641460418701172</y>
            <z>10.90282154083252</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_6.0_Base.sdfa</SupportFilename>
          <DisplayInformation>Ti</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>Ti</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>3.1011848449707031</x>
            <y>-0.27263951301574707</y>
            <z>10.877707481384277</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_6.0_4.5mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_6.0_4.5mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>4.5mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>45mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>3.0976448059082031</x>
            <y>-0.31279683113098145</y>
            <z>10.8802490234375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_6.0_6mm_HybridBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_6.0_6mm_Interface.sdfa</InterfaceFilename>
          <DisplayInformation>6mm Hybrid</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>6mmHybrid</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>3.098388671875</x>
            <y>-0.30467236042022705</y>
            <z>10.828712463378906</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>CamlogSL_6.0_HybridBarBase.sdfa</SupportFilename>
          <InterfaceFilename>CamlogSL_6.0_HybridBarInterface.sdfa</InterfaceFilename>
          <DisplayInformation>Hybrid Bar</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>HybridBar</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>mki69D85jTYC8V7LyJ1hLg4Xi5qqlX1M2Tl0UK8Jk33daMqKbyC/F6NEO3aLhcFmeKtChVeT2Mn3VhE3JdBgtA==</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>CL_3.3_SA.stl</Filename>
      <Signature>fyHYinXF+4kwZ9HWok8OEm8WV+s9oBR0ohgTRHD3roXZGbm4g+O6lIGrrwNmtRspHhjCkt07zIn2epC5FLVfgw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_Base.sdfa</Filename>
      <Signature>sFLm3CHVcz3z6JQIEhsDDSBrEqPqBUvMd2E3EyMg1a6hy60C4zhln3Q9dKld7QeViZC2TrZwS8GssdAmPR/iVg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_Hybrid_Base.sdfa</Filename>
      <Signature>yl4mGS4JXz1vPf0TNpSFuBPO1KdZDoQveRSTWbD2xWAgqsiCDlVMYHUqTx4aWAZcEFzyz6yRuDxVhihiBUhlGg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_Hybrid_Interface.sdfa</Filename>
      <Signature>SV4T4aGHBGZqc1MPyoFgGtxrvsnAUyrUmVm1ExFwBj5LsdmTjom46cf5Qq71ZhrSHSQ89udXiNwoAyfNz/sOQg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_4.5mm_Hybrid_Base.sdfa</Filename>
      <Signature>AVrVHONAnb31eyaKRmCBdWkwEjhj9NhLdR6IpLjEHIi8yBr/Vw4sWdloCKkHU+1eDt5DTTkJtLMDm4uCBD3rog==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_4.5mm_Hybrid_Interface.sdfa</Filename>
      <Signature>hPmS9DVSAGYNfPbTs9S06ypmWxAM6KRTTxvLla3CT/afhht2mlBSdQYVDHLmIiqCweUf6Zx0mSibpgiz4Flrcw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_6mm_Hybrid_Base.sdfa</Filename>
      <Signature>zJu0CmZB+G42k5kWLs8nDSkTYLxVwawYgbMY7uPKnCNyQDbMJfWX8Niz7DuKJa5qjR8uhEBELWDoCSt4P/dQUQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_6mm_Hybrid_Interface.sdfa</Filename>
      <Signature>nuvFd7bb/WKQDy5OC+ePgcweOeacPQMw4JpXPPpwaY4w8wyA6w/sxy5xe/luRhmegMl1AKn7EuvVCoFFTes2MA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_Bar_Hybrid_Base.sdfa</Filename>
      <Signature>/FMZWhr5M72hXBEkN1urmB2/erNhJ7a5w7eAGe8bNA2oQ0gC/xo/b6MzM6MTV9xNXd1O1JsvGh+KK+xIHc2Ulw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.3_Bar_Hybrid_Interface.sdfa</Filename>
      <Signature>FaCAriujLcgzGKfg9Tc2LMPNCcIq/yFToCWHKWr3LywGj5Exnb1x/2jFCpD40n9eHBYJYwdUBBRxDodAvR2KQA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_SA.stl</Filename>
      <Signature>XVnWFJ+D9JY5DWJy92838UK4y+NabJKO61L/fkDqoNDRVyj4blU0xIiLxaSSVLxsGza7z9IzcPFGzt7ZUSpOhQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_Base.sdfa</Filename>
      <Signature>xjfYFgixxZRR4CkZu3vKOE5EXB/PY6NthWidXqrcYDfObOnYB5w2Id+idvbYwZPkeul4kxnu59oMXNUkkT3yFQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_Hybrid_Base.sdfa</Filename>
      <Signature>UzCm3VJ5NvAfIvHL5tzsAyah2lWbH31FtFevboX0fjiTjXXEOqSgtl6ZYgFk8L7N2jDzELF8Mj1SZlb6maX+DQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_Hybrid_Interface.sdfa</Filename>
      <Signature>p0b2l5ErtLu+uArUGQ7MNELq0h/cf4xjCsVQ2wGr56eKcBB1hpL5DBQ9F6V76J6bvy77459zsdG37WNl8YW+wg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_4.5mm_Hybrid_Base.sdfa</Filename>
      <Signature>crjvplUUiogdWYxEStfOn3jtZOGxPlzk7xfUkDbugkeqtZiOMq2M5ytkNH8lgCNIpASoIBfJdh9pL6Hq6hCUCQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_4.5mm_Hybrid_Interface.sdfa</Filename>
      <Signature>qft2vQrC1WDblV3sSZh8ofDmv8ZtTCqIC3xrFnN/rOXqrwDKaytyVzCSYd6e0BpVHLpyA1iE/5Ud9U+BrJI7Tg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_6mm_Hybrid_Base.sdfa</Filename>
      <Signature>KZTq0dFB1ZLYdS1Tci4APtBsTF1Oz/mwsf5e9hqT41QhpHUwWKgA6208OV3YQ94OWHk8nGuZwpu4xiYvm3FUJQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_6mm_Hybrid_Interface.sdfa</Filename>
      <Signature>kyXmOIw1izz8nhgs6Hm+Uql3cxvcteTBdTxElBZX5BIr/E35kilq8SaEc+DpF8RfUBpnTJ6BYUDLDTQzYxZ5kw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_Bar_Hybrid_Base.sdfa</Filename>
      <Signature>E2CXfPmlB6YKIdCXm3mK9khl5AL+44jghs97ddoqDbA3WuBrLVGXnrGp4LR/YoTcz4Fbb6TemKC2emXL2Uuzjw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_3.8_Bar_Hybrid_Interface.sdfa</Filename>
      <Signature>YhsVCQGOmg4hp7kSpt/N8z9mIv08m2T6CJcGvb/bDHNnlitLQrFoJvXGQFqetSJtLaHvMnaz1uJP2zpkg4E37A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_SA.stl</Filename>
      <Signature>OOIaM3IPbOaR3XNFjjvPJeBs7Mf3WgGDMmwLTibRHoZeslHbf2xH3O8cmMJGwvWSbpyFxt46X34Edhv0K59/9w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_Base.sdfa</Filename>
      <Signature>F4xn/HnnQML9726Jkq9yvEur2S9EHLKNIPVUI0jtVwQGdFUcxHNPor7Hc3/rw4pLqq1dFAlxy40pQ6dsgnCRlA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_Hybrid_Base.sdfa</Filename>
      <Signature>SITgeflHkWCQf9mfcMHdIEyGKceATd8jkezOolg9nd0Cf8VX/FhC8l+y2O3V7wIBDNTyFpqOZ5OmoWZxRIcCbw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_Hybrid_Interface.sdfa</Filename>
      <Signature>w61ZhFZEC3MK9S0zuT4dRRTO2ygDyu81bJX9SkjyORDfRgXj6AvRUKlZ2e+93re5NpOtlkDVhcfvInkQVUWKLQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_4.5mm_Hybrid_Base.sdfa</Filename>
      <Signature>I8SO5174QmUI31vysP27urh+syy+lOWuK8TagqrLYNazds/ZcQypWNMAHHW4qhBUX+LPHhrAFZ7LgVWpyLjb5g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_4.5mm_Hybrid_Interface.sdfa</Filename>
      <Signature>4ZSAJILdmlamvJ1fM4cXsKxQwCO1qUNUO/XSHfbw7673Zka5M8XY46Dbmi/WFwSPfnJaCvjgDirPlyPq1CkuqA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_6mm_Hybrid_Base.sdfa</Filename>
      <Signature>RGxDndkQI+HnCnsxWi67lwta2EgIIK+nZz6vBBvIXOKGSuylJY3tM67TIjwC8yhMVgZcrhUnrepEVw2phN2xxw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_6mm_Hybrid_Interface.sdfa</Filename>
      <Signature>pex/GZfLYPftYju1U9G3ljvW79mMLolYj2cnzuClK20BX+7j7+Ja5iPrlPnQeoQuj3O4FvlXCiY2TePJwOk6mA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_Bar_Hybrid_Base.sdfa</Filename>
      <Signature>CUGy8fuI8kgNbuE09gkjfnGfieq+apyytUK/3hXn2zwbCZ8Z/jqZQB7KPl7FCrob7Z+og92QlHFmQV+4H10BYg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_4.3_Bar_Hybrid_Interface.sdfa</Filename>
      <Signature>6yImz8A9icatLMn+dHwdsB4x2V29ujto0FSyTfYFzqS8XdnCz9X51SEAZr7X5PFFRQh3HjWj9GxwTRSCWIQjSg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_SA.stl</Filename>
      <Signature>xkx91LGyimU0VPEfO4rEoqsfhePjX36/UUQMGkoSGweMCG33EnbO8Dp/XTmIdG6pNIr0fZHmxYvehAl3FcAO5A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_Base.sdfa</Filename>
      <Signature>z01CUcYFXopvs6ePMx7nqbv8NB22+apWIESnLe5kMvfqn57CSncu8vIJ69KN76I43YsZdCL0VxWwd4FzuVKt+A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_Hybrid_Base.sdfa</Filename>
      <Signature>1yrYt5xrPHPi9Y8HYQEiJS9Abi2YmWPjqmqHndATtnlF58E6emrYneb0xV9N5EKYSXUSmVTQCjx683QpIqoAnw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_Hybrid_Interface.sdfa</Filename>
      <Signature>FhPB/dcsy/1OvVVMngAe2qhVsCK5nldjFXHYg8odqxgSQ85h2+TbL1TdeFAawHBojHzOc+r3A4AzIXMoVqZScQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_4.5mm_Hybrid_Base.sdfa</Filename>
      <Signature>CcSl6DdhFhv1EfGDxY7DU605FEzDO1+RT95Kb9HNC2NO3z8LaueVVMJrmvu8GOkqiW2YPbxJaZvEdbCN/WkjiQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_4.5mm_Hybrid_Interface.sdfa</Filename>
      <Signature>bh4Mz+kxd4ksxrmwrXKbZ+pzhxrac+HobUAQdOXObzYglkq0W55rLc6Jibye4qJZDsZ0xVcTPb4LDL4bCJ+gqw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_6mm_Hybrid_Base.sdfa</Filename>
      <Signature>SJANOXt14KmJp0TPRxp2hXQXWWiAbj0me8HHYIKejfPacgvPhWmPGIQFI626IuKq2ceIlcAdC0wMtj9HOoz0Bg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_6mm_Hybrid_Interface.sdfa</Filename>
      <Signature>0mRcwXuCqEcL8IxBOrEiWbJfYHUv+NYyjY9UpGwxa7MQdM4xrTG3iyiALEAplsvd4stsqQLvEfNzGCRCdK2ZXg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_Bar_Hybrid_Base.sdfa</Filename>
      <Signature>4zk5A1fkZV3gMltH/Aw7BtZqTXI+iUbwcU7Y8SkQppGPnIA+HdJsSUiww7oZm1qcuyfpLaGvOVGJBUWRWWBpPg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_5.0_Bar_Hybrid_Interface.sdfa</Filename>
      <Signature>yZOx3HEs8LL4ILl6cvcrERGWHcdqsWKqqW5hUwGg94++cAPYypwkuzxIS8W8X+ydYmLtKiXYEzCk6imqLPBgtA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_SA.stl</Filename>
      <Signature>1yTUWACJtJt2DlJiKeYTOvNetSi7q7EspikxznmeLTxhtT8O2pZ18peMjT2hwy21aqq+ixUcduMvwNDy1ggbFw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_Base.sdfa</Filename>
      <Signature>BtG7G5eDLVcxAy92k2QVy8PVoUJiXrfy7IfaWQPFl9yg3XDPO5+Yj5mCRR673Xs51SJnQwA65GWGrIGQAuVHOQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_Hybrid_Base.sdfa</Filename>
      <Signature>w0P4uYSSPRZjYT4xFyA1/W+DkV5YGj7fMrLBMKOhm8jpyt5YUyRP+YC8qhNofZWTmVFcJJYUVRstfIYHW8GACA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_Hybrid_Interface.sdfa</Filename>
      <Signature>SZ7ambhN+nMGThreQln7LhtZR6ghO8LGUwg6WTSVRBayK96+b5EJ45KCZE5uexH36P5n0h+wYNrXhaTwsFwxlg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_4.5mm_Hybrid_Base.sdfa</Filename>
      <Signature>ncsSKsUR4C3UmAaKX1ySYhiFisn1aBJGt43ZKjcajX8rOKuVuFRvhdF9XVchoHE+zzB+NpMMvosekptxHkwWUw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_4.5mm_Hybrid_Interface.sdfa</Filename>
      <Signature>oP+4lfSL/IzK6BIfCCDGfyoxwDNo3/rl0bu4aCHQ/nzr7AZrk0bUxshXsg3ThwxN8T2kOzDo2DXqDCmsPJJgoQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_6mm_Hybrid_Base.sdfa</Filename>
      <Signature>z1TC/XB1MgPW4vW9WeFXe8db++P7/vIuz4XjrBoeoq6xUZ+hpFWAs1+q7LTMrJZ2/bb+OXkweazSoLqW9Ub+0g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_6mm_Hybrid_Interface.sdfa</Filename>
      <Signature>alTfjpN6lAxAkRw4ww5ob2FplgqQdi1HyOO0KJtDPO+PNDPTqqd66eHqA8g0evBmayPo/1hDWzO6VlfzqF4BXQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_Bar_Hybrid_Base.sdfa</Filename>
      <Signature>UcfazYzfFtLcU7THUKeiTZwAIcIUNZax5PUev1gmV+kakebY5e/NtLKR4TTBfkIVPiwC5UU5HrJNZ3aNjctVoQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_6.0_Bar_Hybrid_Interface.sdfa</Filename>
      <Signature>7l2UALGLYlJRUwp82ZNWxiLpFx+2Azhm5VWGN9kRvesf7PItkHZRJUjyMYn5uBxKUjZ29ibMoOpCBY+WY9mjcQ==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>